Consider giving this blog a read to discover the important parameters that must be followed to get a flawless finish to every interior painting project!!
Important Steps to ensure a flawless painting project
- Preparation – One of the first and foremost steps of a painting project is to prepare the walls, surfaces and furniture of the interior for the painting project. It is important to move the furniture, tables, and blinds from the areas you want to paint and cover the areas with a plastic sheet that can’t be shifted.
- Surface Preparation – The next step involves preparing the interior surfaces and the walls that need to be painted. Next, Seal the window frames, door jambs, and baseboards with sealant and ensure that the surfaces are free from dirt or oil.
- Clean Walls – Cleaning the walls before painting is an important step for a successful paint job. If the walls are not cleaned properly and are accumulated with dirt and grime, then it can affect the quality of your paint. This makes it crucial to clean the walls thoroughly before painting the walls.
- Use Eco-Friendly Paint – Using Eco-friendly paintings that have extremely low levels of toxins and VOCs is extremely important. Rather, you can select zero-VOC paints that are considered safe for residential use.
- Tape all the edges and baseboards – A smart way to ensure that the freshly painted walls look flawless is to tape all the edges and baseboards to achieve clean lines. This technique is also known as “cutting in”, and is one of a professional painting trick.
- Use Quality Painting Supplies – When buying painting supplies, research and invest in high-quality paints, binders, additives, and pigments that result in a high-quality finish. If you are thinking of hiring a professional interior painter, ask them what brand or about the quality standards of the paint they are using.
- Select Paint Type – Choose the right paint type based on your wall finish. For oily wall finishes, avoid using latex and instead, sand down the oily finish to remove all dust particles.
- Use Paint Primers – Using a primer is essential as it helps paint stick and evens out the texture. Most paints have primers, but if you get paint without using primer, make sure to buy it separately.
- Painting Tools – When painting, use the right tools such as paint grids, brushes, paint trays, paint rollers, and extension poles. Use a brush for painting around baseboards and small areas and a roller for large surfaces like the ceiling.
- The Real Painting – For a smooth finish, load the brush halfway with paint to avoid lap marks and maintain wet edges. Overlap your strokes and avoid waiting for the previous one to dry.
- Practice Uniformity – Keep a uniform colour by mixing similar paint in one large bucket. Doing so will ensure your painting is even because some cans might have different variances.
- Do not apply just a single coat of paint – It is better to avoid using just a single coat of paint, as this may hamper the finesse and quality of the painting.
Additional Tips to Give Perfection to the Walls
- Do not buy the paints in bulk. Rather buy a limited quantity and see how that works for your interiors. If required, buy more! This will help both save on your budget and avoid damaging the excess paint.
- Disregard painter’s tape because it is time-consuming and expensive. Rather, consider the edge.
- Make a wise selection of the brushes. For instance, brushes with natural bristles work best with oil-based paint, while nylon bristles suit water-based paint.
- If the surface has a rich texture, go for a roller with a large nap. Alternatively, a roller whose nap is 8-10 mm is best for wallboards or wood paint.
- Secure some paint that remains from your project for making a few touch-ups.
- Think about the finish you select. Take time and choose whether you would like to give your walls a satin, matte, gloss or textured finish.
- Preparing and painting the interior takes time, depending on the size. Therefore, avoid rushing the painting process. Apply the first coat of paint, let it dry thoroughly and then resume with the next coating.